Materials
Polyolefins and commodity polymers
Low-density, linear low-density and high-density polyethylene (LDPE, LLDPE and HDPE) and homopolymer, copolymer and random polypropylene, plus polystyrene (GPPS and HIPS) and suspension PVC resin.
Typical grades
| Type | Application | Melt flow index (g/10 min) · K · IV | Density (g/cm³) | Quote |
|---|---|---|---|---|
| PP homopolymer | Raffia and fibers | 3 – 4 | 0.90 | Quote |
| PP homopolymer | Injection molding | 12 – 35 | 0.90 | Quote |
| PP impact copolymer | Injection: pails, crates, parts | 8 – 30 | 0.90 | Quote |
| PP random copolymer | Clear injection and thermoforming | 10 – 30 | 0.90 | Quote |
| HDPE | Blow molding | 0.2 – 0.4 | 0.950 – 0.962 | Quote |
| HDPE | Injection molding | 6 – 20 | 0.952 – 0.965 | Quote |
| LLDPE (C4, C6) | Film | 0.8 – 1.0 | 0.918 – 0.920 | Quote |
| LDPE | Film | 0.3 – 2 | 0.921 – 0.924 | Quote |
| Suspension PVC | Pipes and profiles | K 65 – 67 | — | Quote |
| GPPS / HIPS | Injection and thermoforming | 3 – 12 | 1.04 – 1.05 | Quote |
Typical market values to guide your request; not a specification. The exact grade, producer and origin come with the quote, together with the technical data sheet (TDS). Other grades on request. Melt flow index measured at each resin's standard condition (PP 230 °C/2.16 kg; PE 190 °C/2.16 kg; PS 200 °C/5 kg; ABS 220 °C/10 kg; PC 300 °C/1.2 kg; POM 190 °C/2.16 kg). PVC by K-value and PET by intrinsic viscosity (IV). Asphalt to the standard shown on each row (ANP/DNIT or ASTM).
Typical applications
- Film and flexible packaging
- Injection and blow molding
- Raffia and fibers
- Pipes, profiles and cables